• Fall Tune-up Checklist

• Clean Burner Assembly to improve combustion, reducing waste heat.
• Tune Burners for more efficient burns, saving energy.
• Clean Ignition Assembly to ensure reliable operation on demand.
• Clean & Inspect to ensure safe operation and the absence of cracks from metal fatigue.
• Verify Flue Draft to ensure dangerous gas by-products are properly venting to the outdoors and flue pipes are free from obstruction.
• Inspect Flue Pipe to ensure no corrosion is present which can lead to cracks and the introduction of dangerous fumes into your home.

• Spring Tune-up Checklist

• Calibrate Thermostat for accurate control and to prevent system from running longer than necessary, increasing utility usage.
• Test Refrigerant Charge to ensure optimum levels leading to lower utility usage and extend compressor life.
• Test Capacitors to ensure reliable operation and continued compressor and motor protection.
• Test Crankcase Heaters to ensure proper compressor protection.
• Inspect & Test Controls to keep operating costs low and prevent failures.
• Adjust Fan Switch to prevent wasted energy and excess sound levels from nuisance cycling.
• Adjust Balancing Dampers to improve comfort.
• Clean or Replace Filters to reduce energy use, reduce compressor strain, improve indoor air quality, and improve comfort.
• Clean & Adjust Blower Assembly to extend motor life, improves air quality, and reduces sound.
• Clean Air Flow to ensure proper air flow across the coil for proper humidity removal and reliable operation.
• Visually Inspect Ductwork to identify obvious leaks, which reduce system efficiency and increase utility expense.
• Tighten Electrical Connections to ensure uninterrupted system operation.
• Measure & Record Voltage & Amperage to identify baseline operating conditions.
• Lubricate All Moving Parts to maintain efficiency and extend equipment life.
• Clean Outside Condensing Coil to restore heat transfer efficiency and reduce utility cost.
• Clean Condensate Drains to prevent water damage and the potential for mold formation.
• Secure Loose Panels to prevent debris build up, reduce vibration and ensure safe operation.